The XREC20 set comprises 2 units for full control of the SAX X-ray Sources: XREC20-I emission controller, XRHV02-PS high voltage power supply.
The XREC20-I unit controls the emission current of the X-ray source and also the XRHV02-PS high voltage power supply, displaying both the high voltage and emission current on a single display. The unit allows measurement of working time and anode power. The X-ray source electronics set has both operational and standby modes, guaranteeing the most accurate and stable emission at the start of an experiment. Easy firmware update via USB port (XREC20-I). Unit can be remotely controlled via RS232/485 or Ethernet interfaces.
Supply voltage 110 or 230 VAC, 50/60 Hz, (power consumption max 1800 W)
Emission current range (Ie) 0 – 100 mA, accuracy 0.1 mA
Anode high voltage 0.5 – 15 kV,
range (UHV) accuracy 0.1 kV
Cathode current (Icath) 3 A in Standby mode
up to 20 A in Operate mode
Anode power limit 650 W
Emission curent ramp 0.1 – 50 mA/sec
High voltage ramp 1 – 1000 V/sec
Interlocks high vacuum, cooling water (master), X-ray cover
Communication interface RS232/485, Ethernet
Communication protocol MODBUS-TCP
User interface 7″ TFT display with touchscreen, digital encoder
Interface languages English, German, Polish
Dimensions 483 × 133 × 380 mm (W×H×D), 19″ rack mountable
Weight (approx.) 10 kg
Supply voltage 85 – 260 VAC, 50-60 Hz
Output voltage range Vo 0 – 15 kV
Output current range Io 0 – 100 mA
Max output power 1.5 kW
Polarity negative
Remote control via indirect coupled analogue
I/O (male D-SUB 9)
set and monitor 0 – 5 V
Protection over load and short circuit, vol-tage supply and emperature
Dimensions 483 × 88 × 420 mm (W×H×D),19″ rack mountable
Weight (approx.) 6.5 kg
